New life for an IGH commuter

This was a job to salvage nice hubs and rebuild with fresh rims and spokes. Normally I would lace the rear wheel in a mirror image pattern but I follow the previous builder’s decision for rebuilds. This extends hub life. With renewed rims and spokes, these hubs are ready to roll again.

Wheelbuilding gone digital

I’ve incorporated three digital tools in my process. First, I use a Park Tool truing stand with Mitutoyo digital gauges. The roller tip on the lateral truing gauge is made of teflon to prevent scratches. Second, I use a Park dishing tool with a digital gauge attached so dish is known quantitatively. The next best alternative is using feeler gauges but digital is much faster. Last, and just recently, I’ve been using the Wheel Fanatyk digital tensiometer.

Archives